PP melt blown filter element uses polypropylene (PP) thermal...
This cartridge is washable and reusable, five micron and up to reduce filtration costs. For best results, direct spray into pleats to dislodge sediment. Or, let dry and brush off filter cake from surface of the media.
Introduction
D.King replaces HC/170-5, 170 Series 30" cartridges are manufactured with pleated 100% polyester media for longer life and super high dirt holding capacity.
Our filter media is dramatically thicker than other products. For this reason, cartridges provide "depth" water filtration for greater sediment removal, along with more surface area with pleated design which allows for increased flow rates and the use of smaller filter housings to reduce capital equipment costs.
Our Flow-Max industrial quality pleated sediment filters in all standard 10", 20", and big blue sizes. Available in 0.35 & 1 micron absolute (99.9% removal), and nominal ratings of 1, 5, 20, and 50 microns. Each cartridges is individually wrapped.
Features:
Application:
Filter media |
Synthetic (cellulose free) |
End caps |
Molded Urethane |
Center tubes |
PVC |
Operating temperatures |
40°F to 140°F (4.4°C to 60°C) |
Recommended change out |
20-30 PSID* (maximum) |
Maximum pressure change |
40* PSID |
Flow rate per 9-5/8" cartridge |
150 GPM |
|
|
Please fill in the form below and one of our teams will be in touch with you.