In the manufacturing industry, because the concepts of pollution control and active preventive maintenance of equipment have not been widely promoted, sintered mesh filter technology has not been widely used. Imported equipment in some developed countries does not pay enough attention to the filtering accuracy requirements of the equipment when selecting filtering devices and filter elements, resulting in oil cleanliness exceeding standards shortly after being put into operation, and equipment operation accident rates remain high.

After being used for a period of time, the sintered mesh filter element will be covered with a lot of impurities. If it is not cleaned in time, it will affect the filtration efficiency and effect. Today, D. King will introduce how to easily clean the filter element.

Simply speaking, the cleaning of the filter element can be divided into forward cleaning and reverse cleaning.

1. Forward cleaning refers to the cleaning method of the cleaning agent or the cleaning water from the upstream to the downstream of the membrane. The process can be completed with a pressure slightly greater than the filtration product.

2. Reverse cleaning refers to the cleaning method of the cleaning agent from downstream to upstream of the membrane.

3. D. King Filter does not recommend users to use reverse cleaning, especially terminal filters. The reason is that after reverse cleaning, impurities in the cleaning agent or cleaning water will remain on the downstream end of the membrane, which will cause the next batch of products Pollution.

When purchasing high-quality sintered mesh filter, please look for D. king Filter. International shipping, 100% quality assurance.