Industrial filter bag is welcomed by everyone because of its high filtration efficiency and high filtration accuracy. Do you know its cleaning method and damage reason? Let D. king filter tell you.

Industrial filter bag cleaning method:
1. Gas cleaning: The gas cleaning is performed by backwashing the filter bag with high pressure gas or external atmosphere to remove the dust in the filter bag. Gas cleaning includes pulse spray cleaning, reverse purge cleaning and back suction cleaning.
2. Mechanical tapping and cleaning: It is divided into upper vibration cleaning and central impact cleaning (both for filter bags). It uses mechanical impact devices to periodically press each filter bag to remove ash bags from the filter
3. Manual tapping: including manually tapping each filter bag to remove dust from the filter bag.

Brief introduction to the reasons of industrial filter bag damage:
1. Due to poor cleaning of the dust collector, the collected dust is hardened in the filter bag;
2. Corrosion caused by moisture or acid gas condensation;
3. Cannot burn because the temperature is too high;
4. The installation voltage is insufficient, making the filter bag loose or too tight;
5. Due to incorrect adjustment of spring tension;
6. Collision and frictional contact with adjacent filter bags;
7. Contact with human body or tools during installation, maintenance and inspection will cause damage;
8. Unreasonable wind speed or excessive filtering load;
9. The design of the cleaning parameters is unreasonable, which makes the resistance of the system too high, which is also one of the reasons for the damage of the separation fiber.

Choose industrial filter bag, please find D. king filter, 100% quality assurance!