There are many models of high-flow water filter cores, which can be applied to different filtration systems. It not only allows the passage of high-flow media, but also has the advantages of low pressure loss and long life. In order to let everyone better understand, D. King Filter will give a specific introduction to the performance characteristics of the device.

The large-flow water filter element is easy to handle. Its filter layer is from the inlet to the outlet, and the pore size is changed from coarse to fine, which ensures that impurities are retained in the filter element and avoids the occurrence of secondary pollution. It comes in two forms: an in-in and out-out structure and an in-in and out-out structure, making it easier to replace, while ensuring that pollutants are trapped inside the filter element. In addition, the device has a wide range of applications, whether it is used at startup or continuous operation.

Large flow water filter characteristics:
1. High flow rate means using a smaller size filter housing, reducing investment costs and saving floor space;
2. The replacement of the filter element is faster, simpler and safer
3. The O-ring ensures the reliability of the filter;
4. The hot-melt bonded polypropylene material can prevent particles from being released and unloaded, which is different from ordinary wire wound filter elements;
5. Folded surface design makes the pressure drop of the high-flow filter element lower than other filter elements and longer service life
6. Allowing high-flow media to pass through the filter material has the advantages of high efficiency, low pressure loss and long life.
7. The in and out structure of the filter element makes the replacement of the filter element easy. At the same time keep pollutants trapped inside the filter.
8. The metal-free structure of the filter element allows it to be completely burned, flattened and other environmentally friendly treatments.
9. Multiple filter elements can be installed in the filter housing. A wide range of flow rates can be used. It can be used in both start-up and continuous operation.

● The range of filtration accuracy is relatively wide, you can choose between 0.1 microns to 100 microns.
● The material of the folded filter element is made of glass fiber and polypropylene, without adding any binder, which greatly reduces the probability of the leaching substance in the filter column itself.
● The chemical compatibility of the large flow filter product is very good, and it is resistant to strong acids and bases. It can be applied to the filtration of most organic solvents and the filtration of strong acid and base chemicals.
● The dirt-retaining capacity of the large-flow filter element is very good, and the interception efficiency of particulate matter is very high.
● The high-flow filter element can withstand higher temperatures and has a very good high temperature resistance. At the same time, it can be continuously operated in a high temperature environment and can withstand repeated high temperature and high pressure sterilization.
● The mechanical strength of the high-flow filter element is very high, so that its service life is relatively long, and the pressure is reduced.